Mileage
23,924
Service Date
11/28/2023
Services Performed
- Front tires 32 Rear tires 35
- P0013 code setting, recommend intake/exhaust camshaft solenoid actuators be replaced and JB oil system flush be performed.
- 1. Cycle Oil System Cleaner for 15-30 minutes Idle/Drive Time; to Remove Sludge, Neutralize Acid, Break Down Carbon and Clean Anti-Smog Valves by Vapor Action. 2. Remove the Drain Plug and Drain the Crankcase to Remove the Used Oil and Contaminants from the Oil System. 3. Remove the Oil Filter. Inspect for Obvious Damage, Corrosion and Contamination. 4. Install New Oil Filter to Help Reduce Foreign Object Deposits in the Oil System (Replace Applicable Gaskets and Seals). 5. Inspect the Drain Plug Gasket (Replace If Needed). 6. Install the Drain Plug and Torque to Factory Specification (Remark Torque Line If Faded). 7. Use JB Engine Oil Supplement in the Crankcase to Condition the Metal and Reduce Friction Drag Between Moving Parts. 8. Fill the Crankcase Engine Oil with the Manufacturer Specified Oil to Properly Lubricate the Components Throughout the Entire Oil System. 9. Use One Bottle of Justice Brothers Fuel Injection System Cleaner in the Gas Tank to Stabilize the Fuel, Clean the Fuel lines, Fuel Filter, Injectors, Remove Water and Contaminants from the Fuel System. 10. Perform Basic Vehicle Inspections 11. Reset All Maintenance Lights
- **** RESET OIL LIFE REMINDER ****
- Inspect engine air filter & cabin filter conditions. **** IF FILTERS ARE NOT EASILY ACCESSIBLE PLEASE ADVISE ****
- Inspect windshield wiper operation/condition
- Inspect exterior lens condition and exterior bulb operation
- Lubricate chassis if applicable
- Tire condition and is rotation recommend? YES NO ** CIRCLE ONE **
Jeff P. gave our service a 5 star review on 11/29/2023